I installed AppVerify and created a test plan and published it, but I am not able to run my test plan because there is no robot to play it.
How can I add a robot to AppVerify in order to play a Test Plan?
@matt_s Have you installed rTester in your machine? rTester is the robot that runs the test plans.
1 Like
You will need to have an rTester (robot) installed on the same machine where AppVerify is, or you need to have an rTester installed on a different machine and make it point to AppVerify.
If you don’t have rTester installed anywhere, then download the rTester setup file and run it.
Once you have rTester installed, then you can use Sessions Controller application (which comes included with rTester installation) to add an rTester to one Windows user account. You can use an existing windows user account or have Sessions Controller create the windows user for you.
After installing rTester, you should be able to see it in AppVerify’s “rTester Tab” as shown in this article:
After you have at least one rTester up and running, then you can generate a Test Plan Run from your Test Plan and play it (see AppVerify User Guide section: “Generate Test Run”).
2 Likes